Français
English
Arduino Nano
Arduino Nano has enough processing power to control many electronic components. It has several I/O pins, which allows to connect it to many components. , it is a compact and reduced version of Arduino uno maroc.
Arduino Nano has 14 digital inputs/types (6 of which can be used as PWM outputs), 8 analog inputs.
1.450,00 DA
Arduino Nano is an open-source development board based on Atmel’s ATmega328P microcontroller. It is characterized by its small size and ease of use, while giving similar functionality to those of the Arduino Uno.
The card measures only 18 mm x 45 mm, making it very usable in projects where space is limited. The board has 14 digital input/output pins, 8 analog input pins, and one serial input/output pin.
It is powered by a voltage of 5 volts via a USB port or an external power connector.
Arduino NANO board features:
-Microcontroller: ATmega328
-Supply voltage: 5V
-Input voltage: 5 to 20 volts
-Analog input pin: 8
-Digital inputs/outputs: 14 (6 of which can be used as PWM outputs)
-16 MHz Quartz Oscillator
-ICSP Connector
-USB connection: type B
-DC per I/O pin: 40 mA
-DC for 3.3V pin: 50 mA
-Flash memory: 32 KB of which 2 KB is used by the bootloader
-SRAM: 2 KB
-EEPROM: 2 KB
-Clock frequency: 16 MHz
-Weight: 7g
-Dimension: 1.8 cm X 4.5 cm
-Power consumption: 19 mA
| Caractéristiques | Arduino Nano | Arduino Uno | Arduino Mega 2560 |
|---|---|---|---|
| Microcontrôleur | ATmega328P | ATmega328P | ATmega2560 |
| Horloge | 16 MHz | 16 MHz | 16 MHz |
| Flash | 32 Ko | 32 Ko | 256 Ko |
| RAM | 2 Ko | 2 Ko | 8 Ko |
| EEPROM | 1 Ko | 1 Ko | 4 Ko |
| Entrées/sorties numériques | 14 | 14 | 54 |
| Broches PWM | 6 | 6 | 15 |
| Entrées analogiques | 8 | 6 | 16 |
| Conversion analogique-numérique | 10 bits | 10 bits | 10 bits |
| Communication série | 1 | 1 | 4 |
| Tension d’entrée | 7-12 V | 7-12 V | 7-12 V |
| Tension de sortie | 5V/3.3V | 5V/3.3V | 5V/3.3V |
| Alimentation | USB ou externe | USB ou externe | USB ou externe |
| Dimensions | 18×45 mm | 68.6×53.4 mm | 101.6×53.4 mm |
| Marque | Arduino |
|---|
Produits connexes
MODULE compatible Arduino to control 4 motors DC or 2 stepper motors and have 2 connections for servomotors. This shield uses pins D3 to D12 for operation (direction, speed, etc).
The module is based on two L293D drivers and can control up to 4 DC motors with an intensity of 0.6 A per output (1.2 A at peak).
The « LJ12A3-4-Z/BX » is an inductive proximity sensor that detects metal objects within a 4mm range. It operates on a DC 6-36V power supply and has an NPN (Normally Open) digital output, meaning it completes a circuit to the signal line when it detects metal. These sensors are used in industrial automation for non-contact switching, control, and detection
This is 125K RFID Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications.
Operating on a frequency of 125kHz, these tokens are all pre-programmed with unique ID numbers to communicate wirelessly with RFID Readers over distances of around 10cm or less. This means you can attach it to vehicles or items, keyrings or even pets’ collars to keep track of the location via an array of readers in the office, warehouse or home.
High-capacity brushless motor, maximizes equipment power and extends service life and reduces the risk of breakdowns. This motor is commonly used in industrial applications, comfortable and quite simple in its use, as well as its energy consumption is low.
The SHT3x sensor is the most accurate and precise sensor for measuring humidity and temperature parameters compared to other temperature sensors like LM35, Thermistor, DS18B20 & DHT11/DHT22. Thus SHT3x can be used for industrial applications because of the high accuracy and good sensitivity. Its Relative Humidity operating range is 0 – 100% and Temperature operating range is -40° to +125°C (-40° to +257°F).
- ESP32-WROVER is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications,ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streamingand MP3 decoding. The ESP32-WROVER has two versions: The ESP32-WROVER IPEX Module uses an IPEX antenna while the ESP32-WROVER PCB module has a PCB antenna.
1.3-inch OLED display module with a 128×64 pixel resolution and a blue monochrome screen. It uses an I2C/IIC interface for communication, requires a 4-pin connection, and is compatible with 3.3V to 5V microcontrollers like the Arduino. Key features include high brightness, self-emission (no backlight needed), high contrast, low power consumption, and a wide viewing angle
The MQ2 analog gas sensor is used in gas leak detection equipment. This sensor is suitable for detecting LPG, butane, propane, methane, alcohol, hydrogen, and smoke. It has high sensitivity and a fast response time; the sensitivity can be adjusted using a potentiometer.
0.56 inch 4 Digit 7 Segment LED Display Red Clock 12 Pin Common Cathode Digital Display
5mm 5537 LDR is a 5mm light-dependent resistor with a « 5537 » model number, which is a photosensitive component that changes its electrical resistance based on the intensity of ambient light. Its resistance is high in darkness and decreases as light increases, making it useful for light-sensitive applications like automatic lighting systems, alarms, and light-level detection.
- Wheelbase: 330mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 155×34 (LxW) mm
- Weight: 160 gm
