Français
English
ESP32-CAM-MB WIFI ESP32 CAM Bluetooth Development Board with OV2640 Camera MICRO USB to Serial Port
The ESP32-CAM is an ESP-WROOM-32 development board from AI Thinker, paired with a 2MP OV2640 color camera. The ESP32-CAM module also features an SD card reader that can be used to record images when an event is detected (e.g., presence or motion detector).
3.600,00 DA
The ESP32 CAM is a development board based on the dual-core ESP32 dual-mode WiFi + Bluetooth microcontroller.
This board is equipped with:
-ESP32 chip
-OV2640 Camera: This is a 2MP camera with a resolution of 1600×1200. It can provide full, downsampled, scaled, or windowed 8-bit/10-bit images in a wide range of formats.
-MicroSD card support: The board supports SD cards up to 4GB. It is used to store images or files.
The ESP32-CAM contains the following pins:
-Two I2C interfaces: Used for connecting the chip to other peripherals.
-Two I2S interfaces: Used primarily to transmit or receive audio data. Two DACs: This is an analog-to-digital converter (converts voltage into bits that the chip can understand).
-Three UART interfaces: These are used for programming and communicating with the PC to download code. Two RX receive pins and one TX transmit pin.
-Reset: This is used to reset the chip.
-GND: This is connected to ground.
-Built-in flash: This is a very bright built-in LED that can function as a flash when taking photos.
-Two power pins: 3.3V and 5V.
Its applications:
-Take and send photos via email (you can use SMPT for this project).
-Build a surveillance camera.
-Facial recognition and detection.
-Industrial product counter.
-Industrial wireless surveillance.
-Smart devices.
-Smart agriculture.
-QR code scanner.
-Smart doorbell.
-Home automation.
-Drones.
ESP32 TECHNICAL SPECIFICATIONS
-Wi-Fi 802.11b/g/n/e/i + Bluetooth 4.2.
-Microprocessor: ESP32.
-Power supply range: 5V.
-Low-power 32-bit dual-core processor.
-Onboard 520 KB SRAM, external 4MB PSRAM.
-Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
-Supports OV2640 cameras with built-in flash.
-Supports images uploaded via Wi-Fi.
-Supports multiple sleep modes.
-Supports micro SD cards.
-Flash memory: 4MB.
-Supported video formats: JPEG.
-Built-in LWIP and FreeRTOS.
-Supports STA/AP/STA+AP operating modes.
-Supports Smart Config/AirKiss one-click distribution network.
-Supports local serial upgrade and remote firmware upgrade (FOTA).
-Board size: 40x27x12mm.
-Weight: 10g.
| Marque | Arduino |
|---|
Produits connexes
The SHT3x sensor is the most accurate and precise sensor for measuring humidity and temperature parameters compared to other temperature sensors like LM35, Thermistor, DS18B20 & DHT11/DHT22. Thus SHT3x can be used for industrial applications because of the high accuracy and good sensitivity. Its Relative Humidity operating range is 0 – 100% and Temperature operating range is -40° to +125°C (-40° to +257°F).
The MQ3 analog gas sensor is suitable for detecting alcohol; this sensor can be used in a breathalyzer.
It has high sensitivity to alcohol and low sensitivity to gasoline.
The sensitivity can be adjusted using a potentiometer.
3S 20A Li-ion 18650 BMS Lithium Battery Protection Board is a Battery Management System (BMS) designed for 3-cell 18650 Li-ion battery packs. It offers overcharge, over-discharge, short-circuit, and overcurrent protection to ensure the safe operation and longevity of your battery packs.
The Arduino UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.
- Wheelbase: 330mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 155×34 (LxW) mm
- Weight: 160 gm
- Magnification: Up to 1000X for fine details.
- LCD Screen: Large 4.3-inch screen for clear viewing.
- Resolution: 10MP for sharp, detailed images.
- LED Light: Built-in light for better visibility.
- Versatile: Ideal for observing various samples.
MODULE compatible Arduino to control 4 motors DC or 2 stepper motors and have 2 connections for servomotors. This shield uses pins D3 to D12 for operation (direction, speed, etc).
The module is based on two L293D drivers and can control up to 4 DC motors with an intensity of 0.6 A per output (1.2 A at peak).
5mm 5537 LDR is a 5mm light-dependent resistor with a « 5537 » model number, which is a photosensitive component that changes its electrical resistance based on the intensity of ambient light. Its resistance is high in darkness and decreases as light increases, making it useful for light-sensitive applications like automatic lighting systems, alarms, and light-level detection.
Ardess Digital Mini Thermometer with cable allows you to easily and fast know the environment temperature around you anywhere
The thermometer comes with 1m cable metal sensor probe, perfect for use in refrigerator, aquarium tank, fish tank,pet cage, kitchens,3D printer, solar system, cellar,humidors, incubator or any other places that require monitoring of temperature.
