Français
English
ESP32-CAM-MB WIFI ESP32 CAM Bluetooth Development Board with OV2640 Camera MICRO USB to Serial Port
The ESP32-CAM is an ESP-WROOM-32 development board from AI Thinker, paired with a 2MP OV2640 color camera. The ESP32-CAM module also features an SD card reader that can be used to record images when an event is detected (e.g., presence or motion detector).
3.600,00 DA
The ESP32 CAM is a development board based on the dual-core ESP32 dual-mode WiFi + Bluetooth microcontroller.
This board is equipped with:
-ESP32 chip
-OV2640 Camera: This is a 2MP camera with a resolution of 1600×1200. It can provide full, downsampled, scaled, or windowed 8-bit/10-bit images in a wide range of formats.
-MicroSD card support: The board supports SD cards up to 4GB. It is used to store images or files.
The ESP32-CAM contains the following pins:
-Two I2C interfaces: Used for connecting the chip to other peripherals.
-Two I2S interfaces: Used primarily to transmit or receive audio data. Two DACs: This is an analog-to-digital converter (converts voltage into bits that the chip can understand).
-Three UART interfaces: These are used for programming and communicating with the PC to download code. Two RX receive pins and one TX transmit pin.
-Reset: This is used to reset the chip.
-GND: This is connected to ground.
-Built-in flash: This is a very bright built-in LED that can function as a flash when taking photos.
-Two power pins: 3.3V and 5V.
Its applications:
-Take and send photos via email (you can use SMPT for this project).
-Build a surveillance camera.
-Facial recognition and detection.
-Industrial product counter.
-Industrial wireless surveillance.
-Smart devices.
-Smart agriculture.
-QR code scanner.
-Smart doorbell.
-Home automation.
-Drones.
ESP32 TECHNICAL SPECIFICATIONS
-Wi-Fi 802.11b/g/n/e/i + Bluetooth 4.2.
-Microprocessor: ESP32.
-Power supply range: 5V.
-Low-power 32-bit dual-core processor.
-Onboard 520 KB SRAM, external 4MB PSRAM.
-Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
-Supports OV2640 cameras with built-in flash.
-Supports images uploaded via Wi-Fi.
-Supports multiple sleep modes.
-Supports micro SD cards.
-Flash memory: 4MB.
-Supported video formats: JPEG.
-Built-in LWIP and FreeRTOS.
-Supports STA/AP/STA+AP operating modes.
-Supports Smart Config/AirKiss one-click distribution network.
-Supports local serial upgrade and remote firmware upgrade (FOTA).
-Board size: 40x27x12mm.
-Weight: 10g.
| Marque | Arduino |
|---|
Produits connexes
12mm 12528 LDR is a type of photoresistor with a 12mm diameter and the model number GL12528, which changes its resistance based on the intensity of light it is exposed to. The resistance of the component is high in the dark and drops significantly as light increases, making it useful for detecting ambient light levels
The MQ3 analog gas sensor is suitable for detecting alcohol; this sensor can be used in a breathalyzer.
It has high sensitivity to alcohol and low sensitivity to gasoline.
The sensitivity can be adjusted using a potentiometer.
5621BS Red LED Display 2 Digit 7 Segment Common Anode Digital Display 18 Pin 0.56 inch
This is 125K RFID Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications.
Operating on a frequency of 125kHz, these tokens are all pre-programmed with unique ID numbers to communicate wirelessly with RFID Readers over distances of around 10cm or less. This means you can attach it to vehicles or items, keyrings or even pets’ collars to keep track of the location via an array of readers in the office, warehouse or home.
- Wheelbase: 330mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 155×34 (LxW) mm
- Weight: 160 gm
Stepper motor 28BY J-48 with Driver ULN2003
the ULN2003 stepper motor driver or in English stepper motor, unipolar (4 phases/ 5 wires ) allows you to easily plug the small motor 28BY J-48 5v gràce to the 5 pin male connector and connects easily to an arduino or other through a 4 pin connector for control signals and Gnd (ground/-). The power supply of ULN2003 is between 5 and 12V.
Transceiver module based on an NRF24L01 allowing a 2.4 GHz wireless connection. This module communicates with an Arduino or compatible microcontroller via the SPI bus.
The HW-201 IR infrared obstacle detection module can detect obstacles within a distance range of 2 cm to 30 cm, with a detection angle of 35 degrees.
It can operate with a supply voltage of 3.3 V to 5 V and has a maximum current consumption of 100 mA. The module outputs a digital signal, high when an obstacle is detected, low when no obstacle is detected.
The infrared LED has a wavelength of 940 nm and an operating frequency of 38 kHz. The module operates at temperatures between -25 °C and +55 °C.
The « LJ12A3-4-Z/BX » is an inductive proximity sensor that detects metal objects within a 4mm range. It operates on a DC 6-36V power supply and has an NPN (Normally Open) digital output, meaning it completes a circuit to the signal line when it detects metal. These sensors are used in industrial automation for non-contact switching, control, and detection
