English
Français
-
Saturn 3 Ultra 210.000,00 DA
Experience the ultimate printing precision and quality with the ELEGOO Saturn 3 Ultra. It features a 10-inch 12K mono LCD with a resolution of 11520×5120 and an XY resolution of 19×24 microns, which allows you to print models with exceptional details and sharp edges.
Available on backorder
-
Saturn 4 Ultra 12K 215.000,00 DA
-Innovative Tilt Release Technology
-10-inch 12K Mono LCD
-COB + Fresnel Collimating Lens
-Auto Leveling & Intelligent Mechanical Sensor
-AI Intelligent Monitoring & Power-Loss Resume Printing -
Saturn 4 Ultra 16K 245.000,00 DA
- Next-Level Printing with 16K Precision
- Smart Tank Heating at 30 °C
- High Speed with Tilt Release Technology
- Auto-Leveling, Plug-N-Play
- Upgraded AI Camera with Light for better Monitoring and Timelapse Recording
-
Screen Protector for Photon Mono X Series 1 pcs 1.000,00 DA
For 3D printers: Photon Mono X 6K/Photon M3 Plus
-
-
Sealed Washing Container for Wash & Cure Machine 3.0 Plus 12.500,00 DA
Compatibility: Wash & Cure 3 Plus
-
SERVO MOTOR SG90 9G FOR RC ROBOT 750,00 DA
The SG90 servo motor is a type of continuous rotation motor controlled by a digital signal. It is used in projects such as robotics, position control systems, and DIY projects.
-
Shield L293D Motor Controller 1.100,00 DA
MODULE compatible Arduino to control 4 motors DC or 2 stepper motors and have 2 connections for servomotors. This shield uses pins D3 to D12 for operation (direction, speed, etc).
The module is based on two L293D drivers and can control up to 4 DC motors with an intensity of 0.6 A per output (1.2 A at peak).
-
SHT3x Humidity & Temperature Sensor 950,00 DA
The SHT3x sensor is the most accurate and precise sensor for measuring humidity and temperature parameters compared to other temperature sensors like LM35, Thermistor, DS18B20 & DHT11/DHT22. Thus SHT3x can be used for industrial applications because of the high accuracy and good sensitivity. Its Relative Humidity operating range is 0 – 100% and Temperature operating range is -40° to +125°C (-40° to +257°F).
-
Space Pi Filament Dryer 19.500,00 DA
Ensure optimal filament performance with the Space Pi Filament Dryer. Featuring PTC 360° hot-air heating for fast and efficient drying, it also offers real-time humidity and temperature monitoring. With adjustable drying time settings from 0-48 hours and a one-key setup for 12 filament types, it supports multiple filament diameters (1.75/2.85mm), making it a versatile solution for maintaining filament quality across various materials.
-
Standard Resin 8.500,00 DA
Product Features
● High Precision & Fast Printing
● Strong Adhesion & Easy to Detach
● Stable Performance & Various ColorsExplore Anycubic’s Colored UV Resin available in a 1kg bottle. Achieve vibrant and high-quality UV prints with ease using this premium colored resin. Elevate your creations with vivid tones and superior printing results.
-
STATION FER A SOUDER ZD-8906 3.500,00 DA
The ZD-8906 48W Soldering Iron (Model 88-203B) is a high-performance soldering tool designed for precision and durability in electronics repair, circuit board assembly, and other fine soldering tasks. It comes equipped with three cables for versatile use, ensuring both safety and ease of operation.
-
STATION FER AIR CHAUD KADA852AD+ 9.800,00 DA
KADA 852AD + Machine de retouche, Machine à souder, SMD SMT AiR chaud et fer 110V 220V, support de fer à souder disponible, plateau de retouche
-
Stepper Motor 28BYJ-48 With Driver ULN2003 750,00 DA
Stepper motor 28BY J-48 with Driver ULN2003
the ULN2003 stepper motor driver or in English stepper motor, unipolar (4 phases/ 5 wires ) allows you to easily plug the small motor 28BY J-48 5v gràce to the 5 pin male connector and connects easily to an arduino or other through a 4 pin connector for control signals and Gnd (ground/-). The power supply of ULN2003 is between 5 and 12V.
-
TAG RFID 125 Khz ID 36x29x6.6mm 70,00 DA
This is 125K RFID Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications.
Operating on a frequency of 125kHz, these tokens are all pre-programmed with unique ID numbers to communicate wirelessly with RFID Readers over distances of around 10cm or less. This means you can attach it to vehicles or items, keyrings or even pets’ collars to keep track of the location via an array of readers in the office, warehouse or home.
-
Tough Resin 2.0 Original price was: 13.000,00 DA.12.800,00 DACurrent price is: 12.800,00 DA.
Product Features
● Exceptional Toughness & Resistant to Breakage
● Strong Elongation & High Flexibility
● High Precision, Minimal Shrinkage -
Tough Resin Ultra 14.500,00 DA – 15.000,00 DA
Product Features
● Strong Impact Resistance
● Flexible with Excellent Rebound
● Fine Texture -
TPU Filament 1KG 7.200,00 DA
JAMGHE TPU filament features easy printing and excellent coating adhesion; It is resistant to oil, grease and abrasion. Ideal for projects such as shoe soles, watch straps or drone parts
-
V-Slot 20X20, Linear Guide Rail 1.650,00 DA – 3.300,00 DA
V-Slot is a high quality linear rail profile made of aluminium with an extremely smooth V-groove on the 4 sides. It is accurate, easy to work with and allows you unlimited design control by its modular nature.
-
Wash & Cure 3 Plus 65.000,00 DA
Discover the Anycubic Wash & Cure 3 Plus – an advanced washing and curing machine designed for efficient post-processing of 3D prints. This 42% size-upgraded device features a dual-layer curing platform, enhancing curing efficiency while accommodating more models per cycle. With its innovative Flexicure gooseneck lights, achieve superior curing effects for intricate model details.
Ender-3 V3 KE
89.000,00 DA
Neptune 4 Plus
132.000,00 DA
