English
Français
Curing UV lamp RL-014
The RL-014 UV curing lamp is a compact and powerful lamp designed for rapid curing of adhesives and photosensitive materials used in mobile phone repair and other technical applications. It is ideal for UV adhesives, photosensitive green oil, optical adhesives, shadow-free adhesives and resins requiring UV light to cure effectively.
2.200,00 DA
| Spécification | Détail |
|---|---|
| Marque | Relife |
| Modèle | RL-014 |
| Type | Lampe de polymérisation UV |
| Alimentation | USB (5 V — compatible PC, chargeur ou batterie externe) |
| Tension | 5 V DC |
| Puissance | 5 W |
| Courant | Environ 1400 mA |
| Longueur d’onde UV | ~395 nm (UV-A) |
| Modes d’éclairage | Plusieurs niveaux : forte lumière / faible lumière / flash |
| Dimensions | Compacte (env. 58 × 54 × 42 mm) |
| Poids net | ~100 g |
| Accessoires inclus | Câble USB |
| Refroidissement | Grille intégrée pour dissipation thermique |
⚡ Highlights
✅ Very fast curing—hardens photosensitive glues in seconds.
✅ Versatile USB Power Supply—works with computer, wall charger or external battery.
✅ Adjustable modes—several power levels depending on the material.
✅ Compact and portable design—easy to use even in tight workspaces.
✅ Sturdy construction—durable components and strong assembly.
✅ Built-in cooling—for extended lifespan.
📌 Main applications
✔ Repair of mobile phones — curing of UV adhesives and photosensitive green oil used for screens or components.
✔ General electronics—polymerization of optical adhesives, UV resins, technical inks and adhesives.
✔ Light industrial applications—rapid curing for small UV-requiring assemblies.
Related Products
Transceiver module based on an NRF24L01 allowing a 2.4 GHz wireless connection. This module communicates with an Arduino or compatible microcontroller via the SPI bus.
0.56 inch Red 4 Digit 7 Segment LED Display CC 12pin
The SHT3x sensor is the most accurate and precise sensor for measuring humidity and temperature parameters compared to other temperature sensors like LM35, Thermistor, DS18B20 & DHT11/DHT22. Thus SHT3x can be used for industrial applications because of the high accuracy and good sensitivity. Its Relative Humidity operating range is 0 – 100% and Temperature operating range is -40° to +125°C (-40° to +257°F).
Arduino Nano has enough processing power to control many electronic components. It has several I/O pins, which allows to connect it to many components. , it is a compact and reduced version of Arduino uno maroc.
Arduino Nano has 14 digital inputs/types (6 of which can be used as PWM outputs), 8 analog inputs.
4 Digit 0.56 inch 7 Segment 4 Bit Red LED Digital Display Module Tube with Clock Point for Arduino
- ESP32-WROVER is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications,ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streamingand MP3 decoding. The ESP32-WROVER has two versions: The ESP32-WROVER IPEX Module uses an IPEX antenna while the ESP32-WROVER PCB module has a PCB antenna.
12mm 12528 LDR is a type of photoresistor with a 12mm diameter and the model number GL12528, which changes its resistance based on the intensity of light it is exposed to. The resistance of the component is high in the dark and drops significantly as light increases, making it useful for detecting ambient light levels
The HW-201 IR infrared obstacle detection module can detect obstacles within a distance range of 2 cm to 30 cm, with a detection angle of 35 degrees.
It can operate with a supply voltage of 3.3 V to 5 V and has a maximum current consumption of 100 mA. The module outputs a digital signal, high when an obstacle is detected, low when no obstacle is detected.
The infrared LED has a wavelength of 940 nm and an operating frequency of 38 kHz. The module operates at temperatures between -25 °C and +55 °C.
