English
Français
Curing UV lamp RL-014
The RL-014 UV curing lamp is a compact and powerful lamp designed for rapid curing of adhesives and photosensitive materials used in mobile phone repair and other technical applications. It is ideal for UV adhesives, photosensitive green oil, optical adhesives, shadow-free adhesives and resins requiring UV light to cure effectively.
2.200,00 DA
| Spécification | Détail |
|---|---|
| Marque | Relife |
| Modèle | RL-014 |
| Type | Lampe de polymérisation UV |
| Alimentation | USB (5 V — compatible PC, chargeur ou batterie externe) |
| Tension | 5 V DC |
| Puissance | 5 W |
| Courant | Environ 1400 mA |
| Longueur d’onde UV | ~395 nm (UV-A) |
| Modes d’éclairage | Plusieurs niveaux : forte lumière / faible lumière / flash |
| Dimensions | Compacte (env. 58 × 54 × 42 mm) |
| Poids net | ~100 g |
| Accessoires inclus | Câble USB |
| Refroidissement | Grille intégrée pour dissipation thermique |
⚡ Highlights
✅ Very fast curing—hardens photosensitive glues in seconds.
✅ Versatile USB Power Supply—works with computer, wall charger or external battery.
✅ Adjustable modes—several power levels depending on the material.
✅ Compact and portable design—easy to use even in tight workspaces.
✅ Sturdy construction—durable components and strong assembly.
✅ Built-in cooling—for extended lifespan.
📌 Main applications
✔ Repair of mobile phones — curing of UV adhesives and photosensitive green oil used for screens or components.
✔ General electronics—polymerization of optical adhesives, UV resins, technical inks and adhesives.
✔ Light industrial applications—rapid curing for small UV-requiring assemblies.
Related Products
4 Digit 0.56 inch 7 Segment 4 Bit Red LED Digital Display Module Tube with Clock Point for Arduino
12mm 12528 LDR is a type of photoresistor with a 12mm diameter and the model number GL12528, which changes its resistance based on the intensity of light it is exposed to. The resistance of the component is high in the dark and drops significantly as light increases, making it useful for detecting ambient light levels
Stepper motor 28BY J-48 with Driver ULN2003
the ULN2003 stepper motor driver or in English stepper motor, unipolar (4 phases/ 5 wires ) allows you to easily plug the small motor 28BY J-48 5v gràce to the 5 pin male connector and connects easily to an arduino or other through a 4 pin connector for control signals and Gnd (ground/-). The power supply of ULN2003 is between 5 and 12V.
The MQ3 analog gas sensor is suitable for detecting alcohol; this sensor can be used in a breathalyzer.
It has high sensitivity to alcohol and low sensitivity to gasoline.
The sensitivity can be adjusted using a potentiometer.
The SG90 servo motor is a type of continuous rotation motor controlled by a digital signal. It is used in projects such as robotics, position control systems, and DIY projects.
5mm 5537 LDR is a 5mm light-dependent resistor with a “5537” model number, which is a photosensitive component that changes its electrical resistance based on the intensity of ambient light. Its resistance is high in darkness and decreases as light increases, making it useful for light-sensitive applications like automatic lighting systems, alarms, and light-level detection.
The Arduino UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.
The MQ2 analog gas sensor is used in gas leak detection equipment. This sensor is suitable for detecting LPG, butane, propane, methane, alcohol, hydrogen, and smoke. It has high sensitivity and a fast response time; the sensitivity can be adjusted using a potentiometer.
MODULE compatible Arduino to control 4 motors DC or 2 stepper motors and have 2 connections for servomotors. This shield uses pins D3 to D12 for operation (direction, speed, etc).
The module is based on two L293D drivers and can control up to 4 DC motors with an intensity of 0.6 A per output (1.2 A at peak).
The SHT3x sensor is the most accurate and precise sensor for measuring humidity and temperature parameters compared to other temperature sensors like LM35, Thermistor, DS18B20 & DHT11/DHT22. Thus SHT3x can be used for industrial applications because of the high accuracy and good sensitivity. Its Relative Humidity operating range is 0 – 100% and Temperature operating range is -40° to +125°C (-40° to +257°F).
