Français
English
Tough Resin 2.0
Product Features
● Exceptional Toughness & Resistant to Breakage
● Strong Elongation & High Flexibility
● High Precision, Minimal Shrinkage
Le prix initial était : 13.000,00 DA.12.800,00 DALe prix actuel est : 12.800,00 DA.
Exceptional Toughness & Resistant to Breakag
Tough Resin 2.0 has undergone a comprehensive upgrade in terms of flexural strength. It demonstrates enhanced toughness, making it less prone to fracture when printing miniature components and thin models.
Strong Elongation
Anycubic Tough Resin 2.0 exhibits formidable strength and flexibility, effectively resisting peeling, cracking, and stress marks caused by cyclic vibrations. Models are less prone to breakageeven when dropped from a height.
High Precision
Anycubic Tough Resin 2.0 also boasts excellent precision while maintaining a low shrinkage rate. Printed models feature a smooth surface and clear details.
Low-Odor
Featuring a low-odor and non-irritating composition, Anycubic Tough Resin 2.0 creates a calm and comfortable printing environment. Its formulation significantly reduces volatile organic compounds, making it a green and environmentally friendly choice.
A Wide Compatibility
Designed to be compatible with most LCD 3D printers and optimized for printing wavelengths between 365nm and 405nm, Anycubic Tough Resin 2.0 achieves optimal results, especially when used with Anycubic LCD 3D printers.
Model Display
Instructions for Use
(1) Before use:
Shake the liquid resin before use. Clean the resin tank and the molding platform to keep the bottom of the resin tank in good condition for light transmission.
(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements. Select the correct print parameters and settings for printing.
(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol(≥95%), lactate, or isopropyl alcohol cleaning solution;
(4) Post-processing steps:
A. Remove the printed model from the molding platform with a blade.
B. Submerge the model in the cleaning solution, rinse or ultrasonically wash, then take out and drain; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.
C.Proper processing, such as removing support, polishing, coloring, etc.
Precautions
- The ideal condition for storing uncured resin is a cool, dark place at room temperature and protected from light to avoid high temperature or sunlight.
- Suggested operating temperature is 18-35°C, and a low temperature may affect the printing effect; thus, the resin can be properly preheated before use (not more than 60°C).
- If the resin pigment settles, it can be used after stirring or shaking.
- In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
- To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
- To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
(1) The intensity of the mercury lamp or LED light source is 5-10 mW/m², and the duration is no more than 1 hour (self-regulation);
(2)The exposure time in the sun (summer) is around 1 hour;
(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.
(4) It is recommended to print in a dark room or be covered with a lid while printing, as resin is a photosensitive material.
Recommended Printing Parameters
| Printer Model | Layer Thickness | Exposure Time | Light-Off Time | Bottom Exposure Time | Bottom Layers | Anti-Aliasing Level | Z Lift Distance | Z Lift Speed | Z Retract Speed |
| Photon Mono M7 Max | 0.05 mm | 2 s | 0.5 s | 30 s | 5 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 Pro | 0.05 mm | 2 s | 2 s | 25 s | 4 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 | 0.05 mm | 2.2 s | 1 s | 25 s | 4 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono 4 Ultra | 0.05 mm | 2.6 s | 1 s | 30 s | 5 | 1 | 5 mm | 8 mm/s | 8 mm/s |
| Photon Mono 4 | 0.05 mm | 2.8 s | 1 s | 30 s | 5 | 1 | 6 mm | 4 mm/s | 6 mm/s |
| Photon Mono M5s Pro | 0.05 mm | 3.6 s | 1 s | 30 s | 5 | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M5s (High speed) | 0.1 mm | 3 s | 1 s | 25 s | 6 | 1 | 5 mm | 20 mm | 20 mm |
| Photon Mono M5s (Regular speed) | 0.05 mm | 2.8 s | 1 s | 25 s | 6 | 1 | 8 mm | 5 mm/s | 6 mm/s |
| Photon Mono M5 | 0.05 mm | 2.8 s | 1 s | 25 s | 6 | 1 | 8 mm | 5 mm/s | 6 mm/s |
| Poids | 1 kg |
|---|---|
| Marque | Anycubic |
| Couleur | Noir, Clair, Blanc |
Produits connexes
Passez à la Anycubic ABS-Like Résine Pro 2 pour augmenter de 100 % l’élongation et obtenir une solidité supérieure pour des impressions 3D très résistantes. Idéale pour les pièces structurelles, les prototypes industriels et les fixations, cette résine garantit que vos modèles finis sont plus solides et plus durables.
