Neptune 4 Pro

- Print Volume: 225 x 225 x 265 mm³
- Max Printing Speed: 500 mm/s
- Intelligent Segmented Heatbed
- 121 (11 x 11) Points Auto Bed Leveling
- Up To 300 °C High-Temp Nozzle
- Support PLA/TPU/PETG/ABS/ASA/Nylon Filaments
- USB/LAN Transfer
- Livraison & Retour
Livraison
Livraison en boutique GRATUIT
1 à 3 jours ouvrables
À domicile ou en point relais à partir de 400DA
Sur toutes vos commandes en livraison à domicile ou en point relais
Retours
Retour
Nous accepterons les échanges et les retours de vêtements non portés et non lavés dans les 30 jours suivant la date d’achat (14 jours pendant la période des soldes).
Retours en boutique GRATUIT
Votre retour sera généralement traité dans un délai d’une semaine à une semaine et demie. Nous vous enverrons un e-mail de notification de retour pour vous informer une fois le retour effectué. Veuillez prévoir 1 à 3 jours ouvrables pour que les remboursements soient reçus selon le mode de paiement d’origine une fois le retour traité.
- Poser une question
97.000,00 DA Le prix initial était : 97.000,00 DA.95.000,00 DALe prix actuel est : 95.000,00 DA.
Rupture de stock
Speed Up Printing with Klipper
With the Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor to process and execute commands faster, Neptune 4 Pro can print at up to 500mm/s, allowing you to complete your print projects quickly and efficiently. With our pre-installed Klipper firmware, you can start printing right away without the hassle of firmware installation.
In addition, it supports input shaping, which helps eliminate artifacts and resonances on the model surface, and pressure advance, which helps predict nozzle pressure for more accurate and consistent extrusion and less filament ooze and blobbing.
Potent Extrusion & Upgraded Hotend
The printer’s dual-gear direct drive extruder is another key feature that ensures smooth and consistent extrusion, weighing only 75% of the Neptune 3 Pro.
The 5.2:1 reduction ratio and dual-gear design ensure a firm grip on the filament and prevent the flexible filament from slipping and grinding. The copper-titanium bi-metal throat pipe has a unique air duct design for faster heat dissipation of the throat pipe and less nozzle clogging.
The 300°C high-temp nozzle features an extended hotend design to fully melt the filament, allowing you to explore a wider range of materials, such as PLA, PETG, ABS, ASA, TPU, and high-temp filaments like nylon.
(Tips: ABS and ASA filament materials are recommended to be used in conjunction with a 3D Printer Enclosure.)
Unparalleled Heat Dissipation Performance
In addition to the two thickened 4015 ball bearing cooling fans on both sides of the print head, there are four 4020 ball bearing auxiliary fans behind the print head, which ensure omnidirectional rapid cooling of the newly printed layers even at a fast printing speed, and the deposited hot filament quickly bonds together for better overhang and bridge results.

Stable & Quiet Printing
The ELEGOO Neptune 4 Pro 3D printer is designed for quiet and precise printing with its silent drivers for all axes, reducing noise to below 50 dB. Its wear-resistant POM V-guide wheels move quietly, smoothly, and accurately.
The Z-axis dual lead screw + Z-axis dual motor design provides better synchronization, increasing the accuracy and stability of the print head movement.
Smoother Model Surface
Support for advanced functions like input shaping and pressure advance helps achieve a smooth model surface and consistent extrusion.
Intelligent Segmented Heatbed
With a power output of 100W + 150W, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120 mm x 120 mm).
The two partitions can also be turned on and off manually for more precise temperature control.
Additionally, the surface of the PEI magnetic platform is marked for guidance.
Poids | 11 kg |
---|---|
Dimensions | 26 × 51 × 36 cm |
Marque | Elegoo |
Type d’Imprimante | FDM |
Produits connexes
Anycubic Kobra 2 Neo could be your prime choice for a fast-speed 3D printer. With impressive printing speeds of up to 250mm/s, you’ll experience motion in quality. Elevate your printing endeavours with precision and affordability.
Rupture de stock
Experience the ultimate printing precision and quality with the ELEGOO Saturn 3 Ultra. It features a 10-inch 12K mono LCD with a resolution of 11520×5120 and an XY resolution of 19×24 microns, which allows you to print models with exceptional details and sharp edges.
Disponible sur commande
· Single-frame Accuracy Up to 0.08 mm
· Up to 18 fps Scanning Speeds
· Up to 2× Optical Zoom
· New Global Marker Tracking Mode
· HD RGB Camera Better Color Capture
· 9-axis IMU
Experience the next level of 3D printing with the Anycubic Photon Mono M5s Pro. This upgraded resin printer boasts a 10.1-inch 14k HD screen, delivering unparalleled printing precision. Equipped with an air heater and purification system, this innovative printer ensures smoother prints and enhanced efficiency.
Rupture de stock
POP 3 is the next-gen 3D scanner from the POP series with new and improved hardware, design, and usability. The improvements in POP 3’s capabilities make capturing 3D scans for 3D printing, 3D animation, reverse engineering, healthcare, product design, digitizing historical items, VR/AR, and more even easier.
ELEGOO Neptune 4 Max FDM 3D Printer with Up to 500mm/s Printing Speed, 300℃ High-temp Nozzle, Dual-Gear Direct Extruder, 420x420x480mm³ Printing Size
Rupture de stock
The Ender-3 V3 SE 3D Printer offers fast, smart printing with 250mm/s speed, auto-leveling, and a « Sprite » Direct Extruder for PLA, PETG, and TPU. Dual Z-axis and Y-axis linear shafts ensure stability, while auto filament loading and unloading simplify the process.
Rupture de stock
With 13.6″ 7K monochrome screen and 6,480 x 3,600-pixel resolution, the Anycubic Photon M3 Max will empower your 3Dream with a large build volume for superb 3D prints.
Rupture de stock
Anycubic Photon Mono M5s is the first consumer-grade resin printer equipped with a 10.1-inch monochrome LCD screen with an impressive resolution of up to 11520*5120. With its innovative auto-leveling solution, this printer revolutionizes LCD 3D printing, delivering unparalleled precision and convenience.
Rupture de stock
Elevate your 3D printing experience with the Anycubic Kobra 2 Pro. Combining standard size with an astonishing maximum printing speed of 500mm/s, this printer redefines possibilities. Achieve exceptional results faster than ever before.
Rupture de stock
The Anycubic LightTurbo Matrix light source and high-precision textured optical lens of Anycubic Photon Mono X 6Ks have been enhanced to deliver a stable and perfectly parallel light source. Unleash your creativity with exceptional printing quality and embark on a new dimension of 3D printing precision.
Rupture de stock
Ender-3 V3 KE features Creality OS, 500mm/s speed, and X-axis linear rail for smooth motion. It supports 300℃ printing with the « Sprite » Direct Extruder, offering reliable feeding for various filaments. Enjoy phone control, WiFi, USB drive, quick assembly, auto filament loading, and self-testing. Compatible with PLA, PETG, ABS, TPU (95A), and ASA.
Rupture de stock