Français
English
TL-Smoother – Filtering Module for Stepper Motor Drivers of 3D Printers
The TL-Smoother is a module that can be added to stepper motor drivers (A4988, DRV8825, etc.) that are utilized in 3D printers and CNC.
Its role is to reduce vibrations, ripples and mechanical noise generated by stepper motors, smoothing the electrical signal transmitted to the motor coils.
This module improves print quality, reduces ghosting/moiré phenomena on printed parts and extends the mechanical life of motors.
950,00 DA
⚙️ Technical Specifications
🔌 Compatibility: works with most 3D and CNC printer motherboards.
⚡ Supported drivers: A4988, DRV8825, TMC2100, and other similar drivers.
📐 Compact size easy to install between driver and engine.
🔄 Reduction of vibrations through diode filtering.
🛠️ Simple installation: plug & play with standard connectors.
📊 Optimal effect on engines at low speeds or subject to torque variations.
✅ Benefits
- Improves the fluidity of axis movements.
- Reduces mechanical noise from engines.
- Decreases the ghosting phenomenon on 3D prints.
- Extends the life of engines and belts.
- Easy to install and compatible with most 3D printers.
🛠️ Applications
- 3D printers (Prusa, Creality, Anet, Anycubic, etc.).
- Engraving or cutting CNC using stepper motors.
- DIY projects requiring stepper motor stabilization.
Produits connexes
Transceiver module based on an NRF24L01 allowing a 2.4 GHz wireless connection. This module communicates with an Arduino or compatible microcontroller via the SPI bus.
- Magnification: Up to 1000X for fine details.
- LCD Screen: Large 4.3-inch screen for clear viewing.
- Resolution: 10MP for sharp, detailed images.
- LED Light: Built-in light for better visibility.
- Versatile: Ideal for observing various samples.
cnc drill bit set, cnc drill, pcb drill,Cheap cnc drill bit set,High Quality cnc drill, China pcb drill Suppliers
10 Pcs 0.1mm-1.0mm Carbide micro PCB Drill Bits Print Circuit Board Mini CNC Drilling Bit Set pcb drills
Efficiently Working Device
The CNC 3018 Pro Max is a 3-axis (X/Y/Z) engraving and milling machine designed for amateurs, technicians, electronics engineers and makers.
It allows the machining of PCBs, wood, PVC, plastics, and laser engraving according to the chosen version.
Thanks to its reinforced aluminum structure, its 775 – 100W engine, and its GRBL control, it offers an excellent quality/price ratio for precision work.
The SHT3x sensor is the most accurate and precise sensor for measuring humidity and temperature parameters compared to other temperature sensors like LM35, Thermistor, DS18B20 & DHT11/DHT22. Thus SHT3x can be used for industrial applications because of the high accuracy and good sensitivity. Its Relative Humidity operating range is 0 – 100% and Temperature operating range is -40° to +125°C (-40° to +257°F).
This is a general OLED display Module, 0.91inch diagonal, 128×32 pixels, with embedded controller, communicating via I2C interface.
The SG90 servo motor is a type of continuous rotation motor controlled by a digital signal. It is used in projects such as robotics, position control systems, and DIY projects.
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
The MQ3 analog gas sensor is suitable for detecting alcohol; this sensor can be used in a breathalyzer.
It has high sensitivity to alcohol and low sensitivity to gasoline.
The sensitivity can be adjusted using a potentiometer.
The HW-201 IR infrared obstacle detection module can detect obstacles within a distance range of 2 cm to 30 cm, with a detection angle of 35 degrees.
It can operate with a supply voltage of 3.3 V to 5 V and has a maximum current consumption of 100 mA. The module outputs a digital signal, high when an obstacle is detected, low when no obstacle is detected.
The infrared LED has a wavelength of 940 nm and an operating frequency of 38 kHz. The module operates at temperatures between -25 °C and +55 °C.
