Français
English
ABS-Like Resin V2
Product Features
- High Strength & High Toughness
- Water Washable & Low-odor
- Impact Resistance & High Compatibility
Experience the ultimate solution for water-washable ABS-like resin. Unparalleled toughness and durability, hassle-free post-processing, and minimal odor make it the prime choice for all your resin requirements.
11.500,00 DA
Excellent Toughness, Durability and Well-Performance
With its high toughness, strength, and impact resistance, the Anycubic Water-wash ABS-like Resin V2 is good for printing structural parts, tools, and other models that demand high performance. The printed models are suitable for drilling and tapping.
Easy to Post-Process
Low viscosity and high fluidity facilitate cleanability and accommodate various cleaning methods, including water, washing machines, and ultrasonic cleaners, catering to diverse scenarios. The cleaned model has a nonsticky surface, and the support is easier to remove. making post-processing less challenging.
Durability
The final model shows excellent resistance to drops, guaranteeing stability and durability. Moreover, the model’s durability is enhanced. The printed model can endure exposure to the natural environment for a year without cracks after proper cleaning and curing.
High Precision Minimal Shrinkage
With lower shrinkage, the risk of distortion and deformation is reduced, resulting in high molding accuracy and detailed models.
Low-odor
The mild scent reduces discomfort for those sensitive to odors, creating a more comfortable printing environment.
Model Display
Instructions for Use
(1) Before use:
Shake the liquid resin before use. Clean the resin tank and the molding platform to keep the bottom of the resin tank in good condition for light transmission.
(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements. Select the correct print parameters and settings for printing.
(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol(≥95%), lactate, or isopropyl alcohol cleaning solution;
(4) Post-processing steps:
A. Remove the printed model from the molding platform with a blade.
B. Submerge the model in the cleaning solution, rinse or ultrasonically wash, then take out and drain; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.
C.Proper processing, such as removing support, polishing, coloring, etc.
Precautions
- The ideal condition for storing uncured resin is a cool, dark place at room temperature and protected from light to avoid high temperature or sunlight.
- Suggested operating temperature is 18-35°C, and a low temperature may affect the printing effect; thus, the resin can be properly preheated before use (not more than 60°C).
- If the resin pigment settles, it can be used after stirring or shaking.
- In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
- To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
- To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
(1) The intensity of the mercury lamp or LED light source is 5-10 mW/m², and the duration is no more than 1 hour (self-regulation);
(2)The exposure time in the sun (summer) is around 1 hour;
(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.
(4) It is recommended to print in a dark room or be covered with a lid while printing, as resin is a photosensitive material.
Recommended Printing Parameters
| Printer Model | Layer Thickness | Exposure Time | Light-Off Time | Bottom Exposure Time | Anti-Aliasing Level | Z Lift Distance | Z Lift Speed | Z Retract Speed |
| Photon Mono M7 Max | 0.05 mm | 2 s | 0.5 s | 30 s | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 Pro (Regular speed) | 0.05 mm | 1.8 s | 0.5 s | 25 s | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 Pro (High speed) | 0.1 mm | 3.6 s | 0.5 s | 35 s | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 | 0.05 mm | 2.2 s | 1 s | 35 s | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono 4 Ultra | 0.05 mm | 2.6 s | 1s | 30 s | 1 | 5 mm | 8 mm/s | 8 mm/s |
| Photon Mono 4 | 0.05 mm | 2.8 s | 1 s | 30 s | 1 | 6 mm | 4 mm/s | 6 mm/s |
| Photon Mono M5s Pro | 0.05 mm | 4.2 s | 0.5 s | 35 s | 1 | 5 mm | 20 mm/s | 20 mm/s |
| Photon Mono M5s (Regular speed) | 0.05 mm | 2.8 s | 0.5 s | 25 s | 1 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M5s (High speed) | 0.1 mm | 3.2 s | 0.5 s | 25 s | 1 | 5 mm | 20 mm/s | 20 mm/s |
| Photon Mono M5 | 0.05 mm | 2.8 s | 0.5 s | 25 s | 1 | 8 mm | 6 mm/s | 6 mm/s |
Resin Parameters
| UV wavelength | 365-405nm | Elongation at break | 30-40% |
| Density | 1.1-1.2 g/cm³ | Molding shrinkage | 4.3-5.6% |
| Viscosity | 180-200 cP·mPa·s | Flexural strength | 40-50 MPa |
| Hardness | 80-85D | Flexural modulus | 1000-1200 MPa |
| Tensile strength | 35-45 MPa | Heat deflection temp | 60-65℃ |
| Bottom exposure time | 20-40s | Resin wash | Water/Alcohol |
| Normal exposure time | 1.5-3s (color screen 8s) | Shelf life | 1.5 Year |
| Poids | 1 kg |
|---|---|
| Marque | Anycubic |
| Couleur | Noir, Blanc |
Produits connexes
Passez à la Anycubic ABS-Like Résine Pro 2 pour augmenter de 100 % l’élongation et obtenir une solidité supérieure pour des impressions 3D très résistantes. Idéale pour les pièces structurelles, les prototypes industriels et les fixations, cette résine garantit que vos modèles finis sont plus solides et plus durables.
